Questions about the seals
Questions about the material
PTFE is the abbreviation for polytetrafluorethylene. This compound is used under various trade names for non-stick coatings on cooking, roasting and baking utensils. The most distinctive characteristic of PTFE-coated frying pans, baking tins and other cookware is the slightly waxy surface. What makes PTFE coatings so special are their durability and outstanding non-stick qualities.
BERNDES PTFE coatings are always PFOA-free.
For more information, go to Material und Versiegelungen".
No! The coating consists of plastic (PTFE) - better known as Teflon®. PTFE is a plastic that is to cold, heat and chemical resistant as well as non-stick. It is also used for instance in medicine because it is resistant to chemicals and does not react with bodily fluids. Even if abraded coating particles should get into the body via the food, there is no risk to health because they will be expelled again unchanged.
Furthermore, PTFE coatings can be heated to a maximum sustained temperature of 260 °C/500 °F. Because frying fats and cooking oils burn off well below this temperature is reached, the temperature limit is completely irrelevant to cooking food. When overheated above 360 °C/680 °F, the coating material disintegrates.
Ceramic coatings have only been used in cookware for a few years. They are also completely safe for health.
The extremely hard coatings consist largely of ceramic particles which make the sealed-in surface very scratch-resistant and hard. However: similar to enamel, the impact strength of ceramic coatings is limited, particularly on the pot and pan edges. Therefore, please avoid using metal kitchen utensils or cutlery in them. Ideal are kitchen utensils made of wood or plastic.
Ceramic coatings are not directly comparable to non-stick coatings. Although they come with good non-stick properties at first, these decline after a short period of use and cleaning. This is normal!
We recommend always using a few drops of oil when cooking, just as you would with stainless steel cookware.
Initially, ceramic coatings also have good non-stick properties which can be improved even further by using a little fat or oil. However, over time, the non-stick properties wear off, a process that is accelerated by cleaning in a dishwasher. For this reason, we recommend washing by hand. This is no problem, because the coating ensures even stubborn residues wash off easily.
Ceramic-coated cookware is extremely heat-resistant - up to 400 °C/752 °F. It is also very hard and scratch-resistant, although only impact-resistant to a certain extent, i.e. it is susceptible to knocks on the edges. Due to its high acid-resistance, ceramic-coated cookware is ideal for acidic foods such as spinach, curry, tomato or chilli dishes. Searing can be done wonderfully in ceramic-coated cookware too. The degree of browning is comparable to that of stainless steel cookware, but ceramic coatings are much easier to clean. Induction-capable cookware with ceramic coating has the further advantage that the rapid initial heating from one moment to the next by the induction cooker does not damage the highly heat-resistant coating.
It is possible to flambé without any adverse effects on the coating.
Yes! Cast aluminium cookware from BERNDES is ideal for people with allergies. The non-stick coating is non-toxic and does not affect the human organism at all. BERNDES pots and pans made of cast aluminium are also practically nickel-free because no nickel is added to the cast coating. There are traces of nickel below the measurable limit in aluminium, just as there are everywhere in the natural world. But these traces do not lead to allergic reactions. This means there is finally a great alternative for the large group of people who are allergic to nickel!
Because of its good heat conduction, aluminium is highly regarded and preferred for top-quality cookware. In particular the die-casting process makes optimal material distribution possible for all shapes and designs. A thick base for even heat distribution and a thinner side ensure excellent thermal conditions inside the cookware due to the good heat transfer. This guarantees that food is kept evenly hot, especially when heated for longer periods on a low heat without stirring. It won't stick to the bottom of the pan either. A thick rim ensures both high stability and drip-free pouring.
Cast aluminium cookware is cast from liquid aluminium and is stress-free. Cookware made from aluminium blanks is formed mechanically, which creates stresses in the material. You can see the difference in the different degree of deflection in the base. The advantage of cast aluminium parts is that they are closer to the heat source from the beginning and thus need less heat overall when heating. Note: In accordance with the European cookware standard, cookware bases have to be pre-formed because every material expands when heated. In a hot condition, the base should lie nearly flat on the cooker plate so that the cookware can not "wander" across the cooker plate. This is the best way to guarantee ideal heat transfer.
No! Cast aluminium cookware is lightweight and easy to handle. A cast aluminium pan weighs about a third of a comparable cast iron pan. This makes it easy on the wrists, especially in the case of large products. However, compared with aluminium cookware, cast aluminium is heavier because thicker material is used.
Not quite! It's true in principle, but thick bases also have disadvantages. In order to get the food to the right temperature in pans with extra-thick bases, a much greater mass has to be initially heated. So the disadvantages of higher energy requirement and more time quickly cancel out the advantage of heat retention. BERNDES cast aluminium products are an economic compromise here. The intelligent material distribution allows quick heating with low energy consumption and good heat retention at the same time. For further cooking you can use medium or low heat settings. The base is heated evenly and your meat is fried and browned evenly. Because there's nothing worse than individual hot spots in the pan. That would mean the meat was burned on one side and not even cooked on the other.
Questions about care
Questions about the herding skills
Our ceramic coatings are stain resistant and very easy to clean. Surface stains can usually be removed by rinsing. You can easily remove more stubborn stains from e.g. curry or tomato with a little oil next time you fry. This will completely restore the colour brilliance of your cookware.
An optimal life of the cookware is achieved if you dispense with a cleaning in the dishwasher. The cleaning agents are often too aggressive and attack the material in the long term.
For cleaning, hot water, detergent and a soft sponge are sufficient. For sealed cookware, wiping with a kitchen towel is not enough. Fat remnants must be completely removed as otherwise they may burn into the seal on renewed heating and cause overheating damage.
No! Neither the pan's functions nor your health will be adversely affected by a few knife scratches or stains. No coating is absolutely non-porous. That's why microscopically tiny fat residues get trapped and can cause stains. We recommend careful cleaning and the use of plastic or wooden utensils. Our tip: You can lighten stains caused by fat by cleaning with lemon juice. Deposits that are burned on again and again can no longer be removed and negatively affect the non-stick properties.
To keep your high-quality cookware in good condition, we recommend using wooden or plastic utensils. All cast aluminium cookware with non-stick coating on the market contains plastic (PTFE). Due to its nature, plastic is more vulnerable than stainless steel or other metals. Scratching, scouring and cutting damage all non-stick coatings! Some manufacturers claim that their coatings are completely resistant. But they are coated with only a very thin non-stick layer. That means the non-stick effect wears off very quickly.
All BERNDES stainless steel series are suitable for induction. In addition, the VARIO CLICK INDUCTION, VARIO CLICK INDUCTION WHITE, BALANCE® INDUCTION and BALANCE® SMART INDUCTION are particularly suitable for induction.
If you are not sure whether a pot or pan is induction cookware, just hold a magnet to its base. It's only suitable for induction if the magnet sticks to the base.
All products with cast aluminium handles are completely oven-proof because the handles are made of the same heat-resistant material as the cookware bodies. In contrast, all products with plastic handles are only oven-proof up to a temperature of 160 °C/320 °F. We advise against using cookware with wooden handles in the oven because this causes the wood to dry out and become porous.
Questions Online Shop
If you have questions about your order, you can contact us via phone or e-mail.
We are looking forward to help you!
Phone: +49-(0)40 226 307 080
Our service hours are:
Mo - Th: 08:00 - 18:00 Uhr
Fr: 08:00 - 17:00 Uhr
You can pay with Paypal, credit card (Visa or Mastercard) as as in advance.
The shipping within Germany is done by DHL and is free of shipping costs from an order value above 20,- Euro. For orders under an order value of 20,- Euro the shipping costs within Germany are 4,95 Euro.
International shipping is done by UPS.
You can find a complete list of delivery times and costs here:Delivery times and shipping costs.
The delivery time is one to three business days in Germany and seven to ten business days in all other countries listed. When paying in advance the delivery period begins after receipt of payment. In the case of individual goods, we may indicate different delivery times separately in the Onlineshop.
Learn more about shipping abroad.
As soon as your goods have been shipped, you will receive a shipping confirmation by e-mail. A tracking number is indicated in this mail, which you can call up at www.dhl.de by typing in the tracking number. If you have not received an e-mail, please contact our customer service.
If you wish to cancel your order, please contact our customer service immediately and provide your customer or order number.
If you want to return your goods, first revoke the order within 14 days. As soon as your withdrawal has been received, you will receive a confirmation mail and a return label by e-mail. Pack the goods carefully and completely. You print out the returned return label, stick it outside on your package and take it to the next post office.
If you would like to receive a notification as soon as an article is available again, please click on the 'Notify' button on the respective article details page. As soon as the article is available again in the Onlineshop, you will receive a message by e-mail.